| Height | Small | 60mm Large | 120mm |
|---|---|
| Width | 80mm |
| Protrusion | 14mm |
| Light Source | Integrated LED |
| Wattage | 3W |
| Voltage | 12V DC |
| Colour Temperature | 3000K, 4000K or 5500K |
| CRI Rating | CRI>80 |
| Lumens | 3000K - 240lm 4000K - 245lm 5500K - 250lm |
| Dimmable | Yes |
| Beam Angle | 120° |
| Driver | Separate 12V DC Driver Required |
| Materials | Solid Brass & Polycarbonate |
| Finishes | Black, White, Antique Brass or Solid Brass |
| IP Rating | IP65 |
| Class | Class III | No Earth Required |
| Application | Outdoor |
Curved Wedge Step Light | TriColour
SKU: HVT321SL - 001
PRICE: $91.00
- FINISH:
- Black
- White
- Antique Brass
- Solid Brass
- SIZE:
- Small
- Large
The Curved Wedge Step Light is a solid brass slab with a gently arched face that tapers to a fine edge at the top and deepens toward the base. From the front it is a plain, uninterrupted plate, and from the side it forms a sharp wedge that stands only a short way off the wall, with the fixings tucked onto the sides rather than the face.
A slim diffuser along the lower edge sends light downward, washing the wall and the step or paving beneath it instead of shining outward at eye level. Set low beside stairs, it marks the edge of each tread, and mounted higher on a garden wall, entry or alfresco it adds a quiet pool of light with no visible lens. The body fixes to a bracket on the wall, which keeps the mounting hardware behind the fitting.
- Solid brass body with a gently curved face that tapers to a thin upper edge
- Diffuser along the lower edge directs light downward over the surface below
- Fixings sit on the sides, leaving the face of the fitting plain
- Mounts on a wall bracket and suits stair risers, garden walls, entries and alfresco areas
- Please Note: 12V DC fittings must be used with a low voltage driver
- Please Note: Solid brass will naturally tarnish when installed outdoors, and antique brass may tarnish through its coating
Specifications:
| Warranty | 3 Years |
|---|