Individually handmade in Tasmania, Australia from smooth ceramic clay this elemental wall light is designed to enhance exterior spaces. This cylindrical fitting is hand-dipped into an eggshell white glaze and fired twice to ensure strength and durability. Mounted onto a discreet IP33 rated wall plate this fitting is rated to be used in interior wet areas such as powder rooms and bathrooms and undercover exterior locations that are protected from heavy rain and water sprays (e.g hoses). Providing ambient downlight this wall light is the perfect finishing touch to bathrooms, entranceways or balconies.
*Please note we generally recommend selecting lighting with an IP44 rating or higher. However some products below IP44 may be suitable in some well-covered exterior locations. This particular fitting can also be supplied in a 12v option, we always recommend consulting with your electrician to ensure suitability before making a purchase.
Due to the handmade nature of these wall lights, you might expect to find slight variations in size, glaze finish and form including unique beauty spots and natural inconsistencies. This is what gives each wall light individual lasting value and is not considered as an imperfection or fault.
Before purchasing we recommend consulting your electrician to confirm the selected product meets your requirements.
Material
Ceramic (Smooth Clay)
Colour
Eggshell White
Installation
If choosing to install outdoors, installation height should be no less than 1.8m above the finished floor level unless the installing licensed electrician determines minimal risk of inadvertent contact as per Section 4.5 of AS/NZ 3000:2018. Light is NOT to be installed above garden beds or in locations where upward water spray is unavoidable.