Enhance any interior space with this warm, understated wall sconce. Handmade in Tasmania by firing unglazed smooth clay twice through a slip-cast mould process to ensure consistency. Experience softly illuminated interiors from this dynamic downlight with an intentionally minimal back plate that allows the fitting to stand out, highlighting the handmade indented detail. The raw material hues beautifully complement natural interiors of timber, white or stone walls. Each wall light is made with care and precision, providing an inviting glow that seamlessly blends. With its timeless design, this sconce will add a modern yet organic touch to interiors, elevating home decor.
Due to the handmade nature of these wall lights, you might expect to find slight variations in size, glaze finish and form including unique beauty spots and natural inconsistencies. This is what gives each wall light individual lasting value and is not considered as an imperfection or fault.
Specifications:
Width
120mm
Diameter
100mm
Height
180mm
Light Source
GU10, Not Included
Wattage
5-10W
Voltage
240V
IP Rating
IP20 (Indoor use only)
Finish
Unglazed Stone
Material
Clay Ceramic
Dimmable
Yes - Globe Dependent
Installation
If choosing to install outdoors, installation height should be no less than 1.8m above the finished floor level unless the installing licensed electrician determines minimal risk of inadvertent contact as per Section 4.5 of AS/NZ 3000:2018. Light is NOT to be installed above garden beds or in locations where upward water spray is unavoidable.