The Round Eyelid Step Light sits flush within the wall face, with only a slim circular trim and a curved eyelid shield breaking the surface. The shield hoods the lamp from above, so light is thrown downward and forward across the ground while the source itself stays hidden from anyone approaching. The result is a pool of light on the path with no bright point in the field of view.
The body recesses fully into the wall cavity and locks in place with sprung retaining clips, seating against the trim without visible fixings. Marine grade stainless steel, brass and copper are used throughout, chosen to hold up in coastal and exposed positions where salt and moisture would break down lesser metals. A replaceable lamp sits behind clear glass, so servicing the fitting does not mean removing it from the wall.
Recessed body with a curved eyelid shield concealing the lamp
Sprung retaining clips hold the fitting without visible fixings
Marine grade stainless steel, brass and copper construction
Clear glass lens over a replaceable lamp
Optional canister available for masonry and rendered walls
Suited to stair risers, retaining walls, garden steps and path edge
Please Note: 12V DC fittings must be used with a low voltage driver
Specifications:
Face Diameter
62mm
Face Protrusion
20mm
Recess Depth
Without Canister | 80mm With Canister | 85mm
Cut Out Diameter
Without Canister | 42mm
With Canister | 55mm
Light Source
1 x MR11 LED Globe | Included
Max Wattage
20W
Voltage
12V DC
Supplied Globe Colour Temperature
3000K & 4000K
CRI Rating
CRI>80
Supplied Globe Lumens
3000K | 270lm
4000K | 300lm
Dimmable
No
Beam Angle
60°
Driver
12V DC Weatherproof Driver Required | Not Included
Materials
Brass, Copper, Glass & 316 Stainless Steel
Finishes
Antique Brass, Black, Brass, Copper or Stainless Steel
Coastal Grade
The Stainless Steel, Copper & Brass finishes are suitable for coastal environments with proper care and cleaning