Alabaster Glass Up & Down Wall Sconce
The Alabaster Glass Up & Down Wall Sconce is a slim cylinder of Spanish alabaster held clear of the wall by a solid brass bracket. Light leaves the open ends of the cylinder to wash up the wall and down over it, and the stone body glows softly along its length where the banding runs thin.
Alabaster is quarried and cut rather than moulded, so each cylinder carries its own pattern of translucent veining and no two fittings are alike. The bracket, collar and backing plate are solid brass, held with stainless steel grub screws that clamp the stone without marking it. The brass is left uncoated, so it darkens and settles over time instead of holding a plated finish. The proportions suit entries and porches, a front door or garage surround, and covered alfresco walls where the glow of the stone sits close enough to be seen properly.
- Spanish alabaster cylinder, quarried and cut so the veining differs on every fitting
- Light washes up the wall and down over it from the open ends of the cylinder
- Solid brass bracket, collar and backing plate, fixed with stainless steel grub screws
- Uncoated brass left to weather and darken naturally in the open air
Please Note: Alabaster is a natural material and may vary in colour, pattern, opacity and texture. These characteristics are inherent to the stone and are not considered defects. Solid brass will naturally tarnish when installed outdoors.
| Height | 300mm |
|---|---|
| Width | 77mm |
| Diameter | 60mm |
| Protrusion | 105mm |
| Beam Angle | 180° |
| Light Source | 2 x G9 LED Globes | Included |
| Wattage | 2 x 9W |
| Voltage | 240V |
| Colour Temperature | 3000K or 4000K | Both Globe Sets Supplied |
| Lumens | 3000K | 2 x 270lm 4000K | 2 x 285lm |
| Dimmable | No |
| Materials | Alabaster & Solid Brass |
| IP Rating | IP65 |
| CRI Rating | CRI>80 |
| Class | Class I | Earth Required |
| Application | Outdoor |
| Warranty | 3 Years |
|---|
The lead time for each product variant is shown above the Add to Cart button. This is our best estimate of how long your piece will take to reach you, from the day you order to delivery at your door. Because we work with designers both in Australia and around the world, lead times differ from product to product.
Ready to Ship: up to 4 weeks
In stock at our supplier's Australian warehouse, ready to be prepared and sent to you.
On Order: up to 8 weeks
Produced or assembled by our supplier after you order, then dispatched.
Made to Order: up to 16 weeks
Handmade or hand-assembled by the designer, specifically for you.
Specially Imported: up to 18 weeks
Imported from one of our international designers. Your order joins the next available shipment and is sent to you once it arrives in Australia.
Pre-Order: month shown
Currently out of stock. The month shown is when new stock is expected at our supplier's warehouse, so please allow extra time for delivery to you after that.
Lead time on request
Stocked by our Australian supplier from time to time, so availability changes. Get in touch, and we'll confirm a current estimate.
Good to know
- If your order includes items with different lead times, they may arrive separately.
- Delivery times can vary depending on your location and courier.
Questions? Contact our team.
