Curved Wedge Step Light in black, small 60mm panel with a smooth, gently arched face.
Tall black panel in the large 120mm size, its face arching slightly from side to side.
White powder coated brass in the small size, a plain arched face with a fixing on one side edge.
Large white fitting, a smooth rectangular face that curves toward the viewer.
Brushed bronze tones run through the small antique brass face, darker toward the base.
In the large size, the antique brass face shows a fine vertical grain with a darker lower edge.
Small solid brass face, warm gold at the top and deepening to copper tones toward the lower edge.
Solid brass Curved Wedge Step Light in the large 120mm size, its satin face catching the light.
Side profile of the small black fitting, a sharp wedge with a round screw head near its base.
Seen edge-on, the large black body tapers from a deep base to a thin blade at the top.
Edge view of the small white fitting, its wedge outline marked by a single round screw.
Tapering outline of the large white body in profile, with the screw head set low on its side.
Antique brass wedge in profile, small size, narrowing to a fine point with a dark screw near the bottom.
Slim curved blade of the large antique brass body, rising from a deeper base in this profile view.
Narrow wedge of solid brass in the small size, shown from the side with a copper-toned screw.
From the side, the large solid brass wedge curves up from a deeper base to a very thin top edge.
Dimension diagram for the small wedge light showing an 80mm width, 60mm height and 14mm depth.
Drawing of the large size, 80mm wide and 120mm tall, with the 14mm wedge profile at its side.
Curved Wedge Step Light in black, small 60mm panel with a smooth, gently arched face.
Tall black panel in the large 120mm size, its face arching slightly from side to side.
White powder coated brass in the small size, a plain arched face with a fixing on one side edge.
Large white fitting, a smooth rectangular face that curves toward the viewer.
Brushed bronze tones run through the small antique brass face, darker toward the base.
In the large size, the antique brass face shows a fine vertical grain with a darker lower edge.
Small solid brass face, warm gold at the top and deepening to copper tones toward the lower edge.
Solid brass Curved Wedge Step Light in the large 120mm size, its satin face catching the light.
Side profile of the small black fitting, a sharp wedge with a round screw head near its base.
Seen edge-on, the large black body tapers from a deep base to a thin blade at the top.
Edge view of the small white fitting, its wedge outline marked by a single round screw.
Tapering outline of the large white body in profile, with the screw head set low on its side.
Antique brass wedge in profile, small size, narrowing to a fine point with a dark screw near the bottom.
Slim curved blade of the large antique brass body, rising from a deeper base in this profile view.
Narrow wedge of solid brass in the small size, shown from the side with a copper-toned screw.
From the side, the large solid brass wedge curves up from a deeper base to a very thin top edge.
Dimension diagram for the small wedge light showing an 80mm width, 60mm height and 14mm depth.
Drawing of the large size, 80mm wide and 120mm tall, with the 14mm wedge profile at its side.

Curved Wedge Step Light | TriColour

$91.00 NZD

Standard Lead Time: 3 - 7 Days

The Curved Wedge Step Light is a solid brass slab with a gently arched face that tapers to a fine edge at the top and deepens toward the base. From the front it is a plain, uninterrupted plate, and from the side it forms a sharp wedge that stands only a short way off the wall, with the fixings tucked onto the sides rather than the face.

A slim diffuser along the lower edge sends light downward, washing the wall and the step or paving beneath it instead of shining outward at eye level. Set low beside stairs, it marks the edge of each tread, and mounted higher on a garden wall, entry or alfresco it adds a quiet pool of light with no visible lens. The body fixes to a bracket on the wall, which keeps the mounting hardware behind the fitting.

Must be used with suitable 12v DC LED driver - Weatherproof LED Driver | Assorted Wattage

  • Solid brass body with a gently curved face that tapers to a thin upper edge
  • Diffuser along the lower edge directs light downward over the surface below
  • Fixings sit on the sides, leaving the face of the fitting plain
  • Mounts on a wall bracket and suits stair risers, garden walls, entries and alfresco areas

Please Note: Solid brass will naturally tarnish when installed outdoors, and antique brass may tarnish through its coating   

SKU: HVT321SL - 001
Height

Small | 60mm

Large | 120mm

Width80mm
Protrusion14mm
Light SourceIntegrated LED
Wattage3W
Voltage12V DC
Colour Temperature3000K, 4000K or 5500K
CRI RatingCRI>80
Lumens

3000K - 240lm

4000K - 245lm

5500K - 250lm

DimmableYes
Beam Angle120°
DriverSeparate 12V DC Driver Required 
MaterialsSolid Brass & Polycarbonate
Finishes Black, White, Antique Brass or Solid Brass
IP RatingIP65
ClassClass III | No Earth Required
ApplicationOutdoor 

 

Warranty 3 Years
SPEC SHEET

The lead time for each product variant is shown above the Add to Cart button. This is our best estimate of how long your piece will take to reach you, from the day you order to delivery at your door. Because we work with designers both in Australia and around the world, lead times differ from product to product.

Ready to Ship: up to 4 weeks
In stock at our supplier's Australian warehouse, ready to be prepared and sent to you.

On Order: up to 8 weeks
Produced or assembled by our supplier after you order, then dispatched.

Made to Order: up to 16 weeks
Handmade or hand-assembled by the designer, specifically for you.

Specially Imported: up to 18 weeks
Imported from one of our international designers. Your order joins the next available shipment and is sent to you once it arrives in Australia.

Pre-Order: month shown
Currently out of stock. The month shown is when new stock is expected at our supplier's warehouse, so please allow extra time for delivery to you after that.

Lead time on request
Stocked by our Australian supplier from time to time, so availability changes. Get in touch, and we'll confirm a current estimate.

Good to know
- If your order includes items with different lead times, they may arrive separately.
- Delivery times can vary depending on your location and courier.

Questions? Contact our team.

What lights can I put in my bathroom?

How do I light my kitchen?

What lights can I put in exterior/outdoors locations?

What do I need to know about outdoor lights in coastal locations

What globe do I need for my lights?

Does my light need a driver?

How can I dim my lights?

Curved Wedge Step Light | TriColour - Black / Small

Please enter your details below, so we can prepare a quote.

Handmade glass wall sconce on a white wall with a garden in the background light on
Woven Iron Stripes Pendant Light - Lighting Collective

2026 Lighting Trends & Expert Buying Tips

n 2026, lighting has evolved beyond pure function to become the defining "jewellery" of the home — with tactility, sculptural form, and emotional well-being at the forefront of design thinking. Our expert team's 2026 Lighting Buyers Guide covers the key trends, materials, and technical considerations to help you make confident choices for every room.

This year's dominant aesthetic is "Functional Art" — pieces that serve as striking focal points even when switched off. Standout movements include hand-blown organic glassware with wabi-sabi imperfections, a Mid-Century Modern revival with living brass finishes, bold Brutalist forms, and a growing celebration of local Australian design. Leading materials include aged brass, natural fibres like rattan, and translucent alabaster and stone.

Room by room, the guide recommends a layered lighting approach, with expert advice spanning kitchen linears, bedroom warmth, exterior accent lighting, and the technical essentials — smart integration, CRI ratings, and flexible track systems.

Read our 2026 designer lighting buyers guide