A sculptural, fluted wall sconce in a pearlescent off-white finish, mounted on a plain light gray wall.
A modern wall sconce with a fluted, pleated shade glowing with warm light against a solid beige wall.
A modern wall sconce with a translucent pleated shade, casting soft light and dramatic shadows on a paneled wall.
Pearl pleated wall sconce beside glass block wall
A warm, modern wall sconce with a flared translucent shade glowing with a soft yellow light, mounted on a beige wall in a warmly lit interior setting.
Two flared pleated wall sconces installed beside mirrors
Flared pleated wall sconce beside an art print on a beige wall
Two flared pleated wall sconces installed beside two mirrors in a salon setting
A translucent pleated wall sconce made of bio-plastic, mounted on a dark brown wood-paneled wall with dramatic sunlight casting shadows.
A close-up of a sheer, semi-transparent wall sconce on a wooden wall, with warm sunlight casting a shadow on the wood.
A modern wall sconce with a flared, pleated translucent shade, mounted on a tiled wall with dramatic light and shadow play.
A modern wall sconce with a fluted, pleated translucent white shade, mounted on a textured beige wall and casting soft shadows.

Mabel Wall Light

Regular price $400.00 NZD

Made to order: 3 - 4 Weeks

The Mabel Wall Light draws inspiration from bridal dresses and the organic drape of sheer fabrics. Availabble in five finishes, this versatile wall light is suitable for bedrooms, living spaces and hallways. 3D printed from Polylactic Acid, a biodegradable plastic derived from plant starches. This renewable material is translucent, emitting a warm glow when illuminated. This elegant fitting is ideal for a variety of interior styles including contemporary, Japandi and Scandinavian.

  • Silhouette inspired by the organic drape of fabric
  • Crafted from 3D printed bio-plastic
  • Ideal for living rooms, hallways and bedrooms
  • Complements contemporary, Scandinavian and Japandi interior styles 

Please note: Due to the nature of the 3D printing process, minor surface variations may occur. These subtle differences are part of the character and uniqueness of each piece. Use LED bulbs only (no halogen), within the listed wattage. Clean gently with a soft microfibre cloth. Avoid extreme heat and pressure to protect the form of the material.   

SKU: FS505WL - 001
Height240mm
Width250mm
Depth130mm
Light Source1 x G9 LED Globe | Not Included
Max Wattage4.5W
DimmableYes - Globe Dependent
MaterialPLA (Polylactic Acid)
FinishPearl | Caramel | Light Pink | Light Blue | Emerald
IP RatingIP20
ApplicationInterior
DesignerFranca Studio
Made InAustralia
Warranty 1 Year

3D printing and natural variation. All Franca Studio products are 3D printed. Minor surface variations, including layer lines and small differences in texture, finish, and colour, are a normal part of the process and are not considered faults. Colours may appear slightly different on screen than in person.

Use and care. Suitable for indoor use only and not rated for wet areas. Use LED bulbs only, within the maximum wattage listed for the product (bulbs not supplied). Clean gently with a soft microfibre cloth. Only LED globes are supported; absolutely no Halogen globes should be used with these products. Products can deform if placed under extreme heat & pressure, so should be handled with care.

The lead time for each product variant is shown above the Add to Cart button. This is our best estimate of how long your piece will take to reach you, from the day you order to delivery at your door. Because we work with designers both in Australia and around the world, lead times differ from product to product.

Ready to Ship: up to 4 weeks
In stock at our supplier's Australian warehouse, ready to be prepared and sent to you.

On Order: up to 8 weeks
Produced or assembled by our supplier after you order, then dispatched.

Made to Order: up to 16 weeks
Handmade or hand-assembled by the designer, specifically for you.

Specially Imported: up to 18 weeks
Imported from one of our international designers. Your order joins the next available shipment and is sent to you once it arrives in Australia.

Pre-Order: month shown
Currently out of stock. The month shown is when new stock is expected at our supplier's warehouse, so please allow extra time for delivery to you after that.

Lead time on request
Stocked by our Australian supplier from time to time, so availability changes. Get in touch, and we'll confirm a current estimate.

Good to know
- If your order includes items with different lead times, they may arrive separately.
- Delivery times can vary depending on your location and courier.

Questions? Contact our team.

Rounded rectangular wall light on grey background
Rounded rectangular wall light illuminated on grey background
Regular price $386.00 NZD
Side view of minimalist rectangular 3D printed wall light that is illuminated
Side view of minimalist rectangular 3D printed wall light on beige background
Regular price From $293.00 NZD
A modern wall-mounted light fixture with vertical pleated detailing, shown in a softly lit bedroom setting next to a bed and side table.
A modern wall-mounted light fixture with a pleated translucent shade, glowing with a warm light against a solid beige wall.
Regular price From $453.00 NZD
3D printed plug in wall light fixture with a rectangular, vertically ribbed off-white shade
Modern plug in wall light fixture with a pleated, translucent off-white shade casting a warm glow
Regular price From $533.00 NZD
A sculptural, fluted wall sconce in a pearlescent off-white finish, mounted on a plain light gray wall.
A modern wall sconce with a fluted, pleated shade glowing with warm light against a solid beige wall.
Regular price From $400.00 NZD
3D printed wall-mounted sconce with a fluted, pleated design in a shimmering dusty pink metallic finish
A modern wall-mounted sconce with a textured, pleated rectangular shade in pink 3D printed lighting
Regular price From $320.00 NZD