Textured Ceramic Wall Sconce | Pinched - Bare Porcelain / Globe | IP20
Please enter your details below, so we can prepare a quote.
The Pinched Ceramic Wall Sconce, formed by hand in Sydney, carries the marks of its maker. Each press and fold is left in the clay before it's cast in ceramic. The original form is used to create a mould, then high-fired until translucent. This keeps every pinch mark visible in the finished piece. That texture shapes how light moves across the surface. It diffuses into a warm, ambient glow rather than a direct beam.
The sconce is available in two finishes. For the Bare Porcelain finish, the form is left unglazed, keeping the porcelain pale and translucent so light passes softly through the clay body. For the Tenmoku finish, the same form is glazed in an iron oxide-rich gloss, turning the pale body a glossy brown, breaking to black a darker, moodier alternative with the same pinched texture underneath.
Mounted alone, it reads as a unqiue wall feature. Grouped in pairs, the sconces create an artful statement. The soft, warm glow suits bedrooms, hallways, and living spaces where a soothing, restful atmosphere is the goal. It also suits bathrooms and protected outdoor areas when choosing the IP54 integrated LED option.
Please Note: Due to the artisanal, handmade nature of this fitting, natural variations in size, form, colour, pattern and texture may occur. We do not consider these to be defects, but rather a celebration of the unique character and natural beauty of each individual piece. If you require a matching pair, please contact us prior to purchase so we can assist in matching your products.
| Height | 210mm |
|---|---|
| Width | 210mm |
| Depth | 90mm |
| Light Source | 1 x E27 Globe Integrated LED |
| Wattage | 6W |
| Colour Temperature | 3000K |
| Voltage | Globe | 240V LED | 24V |
| Lumens | Globe | 500lm LED | 408lm |
| Dimmable | Globe | Dimmable E27 Globe (Included) Dimmable LED options Available |
| Driver | IP54 | On/Off 24V (Standard) Dali Dimmable, Phase Dim & Touch Dim Available at an Additional Cost |
| Materials | Australian Porcelain |
| Finishes | Bare Porcelain, Clear Glazed |
| CRI | >90 |
| IP Rating | Globe | IP20 LED | IP54 |
| Application | Indoor & Bathroom |
| Warranty | 2 Years Workmanship Faults, 3 Years LED components |
|---|
Please Note: Due to the artisanal, handmade nature of this fitting, natural variations in size, form, colour, pattern and texture may occur. We do not consider these to be defects, but rather a celebration of the unique character and natural beauty of each individual piece. If you require a matching pair, please contact us prior to purchase so we can assist in matching your products.
The lead time for each product variant is shown above the Add to Cart button. This is our best estimate of how long your piece will take to reach you, from the day you order to delivery at your door. Because we work with designers both in Australia and around the world, lead times differ from product to product.
Ready to Ship: up to 4 weeks
In stock at our supplier's Australian warehouse, ready to be prepared and sent to you.
On Order: up to 8 weeks
Produced or assembled by our supplier after you order, then dispatched.
Made to Order: up to 16 weeks
Handmade or hand-assembled by the designer, specifically for you.
Specially Imported: up to 18 weeks
Imported from one of our international designers. Your order joins the next available shipment and is sent to you once it arrives in Australia.
Pre-Order: month shown
Currently out of stock. The month shown is when new stock is expected at our supplier's warehouse, so please allow extra time for delivery to you after that.
Lead time on request
Stocked by our Australian supplier from time to time, so availability changes. Get in touch, and we'll confirm a current estimate.
Good to know
- If your order includes items with different lead times, they may arrive separately.
- Delivery times can vary depending on your location and courier.
Questions? Contact our team.
Textured Ceramic Wall Sconce | Pinched - Bare Porcelain / Globe | IP20
Please enter your details below, so we can prepare a quote.
Milly Dent Studio makes handcrafted wall sconces rooted in the textures and forms of the Sydney coastline. Each piece begins with close observation of the natural world — coral structures seen under a microscope, the surface of a sea urchin shell — translated into sculptural porcelain forms that function as both lighting and art.
The studio spotlight covers:
The work is considered and unhurried. Every piece is made to be lived with, not stored away. It's a compelling example of Australian design at its most thoughtful.